DripIrrigation.org
DripIrrigation.org
Get Expert Advice On
Advantages of Drip Irrigation
Conserving Water with Drip Irrigation
System Components
Definitions of Drip Irrigation
Financial Benefits
Payback Wizard
Food Safety
Yardcare Giveaway
Drip Irrigation Layout
Design Tools
Installation Video
Select-a-Tool Advice
Drip Irrigation Owner's Manual
Drip Tape Irrigation Calculator
Scheduling
Troubleshooting
Monthly Question
Links to University Research
Links to Online Articles
Other Sites of Interest
Monthly Question
Answers to Our Monthly Questions
Submit a question to our Experts
Monthly Question
Tips from our Experts
Find A Local Expert
Latest Trends
 
Definitions of Drip Irrigation

Drip irrigation may be defined according to a number of performance parameters including flow rates, wetting pattern, pressure rating and construction material.  Regardless of the specific type, make or model of a drip irrigation system or component, its performance is typically characterized as follows:

 

Water is Applied at a Low Flow Rate

Emission device flow rates are typically measured in gallons per hour (GPH), resulting in low application rates.

Water is Applied for Long Periods of Time

Irrigation duration may be hours rather than minutes when the application rate is low.

Water is Applied Frequently

Irrigation events may occur daily, or even muliple times per day, when the application rate is low.

Water is Applied at Low Pressure

Operating pressures typically range between 10-30 psi, rarely exceeding 60 psi, for most emission devices.

Water is Applied Directly to the Soil and the Plant's Root Zone

Water drips, or sprays, directly onto the soil and into the targeted plant's root zone without wetting the plant or non-targeted areas, and without regard to the presence of wind.  Depending on soil type and emission device, wetting paterns typically range from 0.5-6.0 feet for emitters and up to 40 feet for micro jets or sprays.

Water is Applied Through Numerous Emission Devices

In point source drip irrigation, each plant is fitted with at least one emission device to service the plant's water needs.  In broadcast drip irrigation, a gridwork of emission devices wets the entire area, servicing all plants within the wetted area.

Water is Filtered

To avoid plugging the relatively small passages inside drip emitters, 150-200 mesh filters are used to remove mineral or organic materials from the irrigation water.

Fertigation is Enabled

Since water is applied directly to the root zone, there is an opportunity to apply nutrients along with the water.

Operation can be Automated

Drip irrigation systems are often controlled with solenoid enabled valves that can be automatically actuated according to a user defined program entered into an irrigation controller.

< Back



Featured Installations

Drip Irrigation

Find Local Experts

Drip Irrigation Solutions for your Crop
Drip Irrigation Grower Success Stories
weed control
If you would like to be considered as a Local Expert, please contact contact@dripirrigation.org.
Find Local Experts